|
|
EVA XT
|
ONE Sense
|
ONE Handy
| ||
|---|---|---|---|---|---|
| General | |||||
| Overview |
Large format perfect binders for PUR and EVA glue. Best choice for difficult paper materials, such as highly coated stocks. |
Large format perfect binding machine (A3+). With PGO roughening system. suitable for coated papers. |
Standard format perfect binding machine (up to A4+). Semi-automated. With PGO roughening system, suitable for coated papers. |
Compact small format (up to A4 portrait and landscape)manually operated glue binder. |
|
| Binding format |
Up to oversized A3 portrait
|
Up to A4+ portrait and landscape Book height from miniature up to 320 mm (12.6") Book width: from 70 mm * (2.7 inch*) up to 235 mm (9.3") * = if cut after binding, book width can be miniature |
|||
| Binding thickness |
0,1 - 50 mm (0.004 - 1.97")
|
0,1 - 60 mm (0.004 - 2.3") | |||
| Typical binding speed |
Soft cover books: 100 books per hour |
||||
| Maximal capacity (depending on operator) |
Up to 450 binding cycles per hour / up to 180 books per hour |
||||
| Installation |
Pureva Smart is stand-alone. All others are compact desk top solutions |
||||
| Adjustment time |
No adjustment needed for thickness or format (width or height) |
||||
| Casing in system for hard cover binding |
Yes. Built-in casing-in system |
Yes. Hard cover toolkit optional. |
|||
| Typical glue consumption |
A4 Portrait book (spine length 297 mm), thickness 5 mm: 66 books with 1 dl (or 100 g) of glue |
||||
| Minimum adhesive consumption |
PUR: 0,5 dl, EVA: No adhesive loss (can be re-heated) |
EVA: No adhesive loss (can be re-heated) |
|||
| Operation |
Pureva Smart: automated roughening, gluing and nipping - All others are manually operated |
||||
| Glue application and spine preparation | |||||
| Glue application method |
Fastbind glue contact roller / glue penetration to spine with gravity |
||||
| Roughener |
New type dust free PGO roughener. Optimized for both PUR and EVA binding. |
PGO roughener |
|||
| Supported glue types |
PUR (cleaning of glue tank after use required. takes a few minutes) |
EVA (no cleaning of glue tank required) |
|||
| Adhesive recommendations |
EVA: Fastbind Hot melt type 10.0 |
Fastbind hot melt type 10.0 |
|||
| Glue temperature control |
Electronic. Two temperature settings, one for PUR and one for EVA. One button easy to use interface. |
With bi-metal thermostat |
|||
| Safety & comfort | |||||
| Auto-off |
Yes. Automatic switch off in 10 hours after machine is switched ON. |
No. Recommended to use external timer switch for auto-off. |
|||
| Fume extractor |
Highly recommended. Machine equipped with extraction unit connection & hood. |
Extractor not required, tested for safe use in office environment. |
|||
| Work light with light switch |
Yes |
No. |
|||
| CE marked |
Yes |
||||
| Accessories | |||||
| Standard accessories |
Hard and soft cover toolkit, 1 x EVA glue cartridge,1 x PUR glue cartridge, 2 x cartridge grippers, storage locker for glue cartridges, funnels for glue filling, 2 x gluer caps, tool for gluer cap, glue drop cards, power cord, 50 mm and 100 mm adapters for fume extraction |
Soft cover tool set, drop cards, power cord |
|||
| Optional accessories |
PUR glue cartridge, EVA glue cartridge |
Large format hard cover tool set |
Small format hard cover tool set |
||
| Complementary equipment | |||||
| Fastbind Casemakers (for making personalized hard covers) |
Fastbind large format case maker: a46a, a46z or H46Pro. Fastbind medium format case maker H32Pro |
Fastbind medium format case maker H32Pro |
|||
| Fastbind Creasers (for creasing of printed soft covers) |
Fastbind large format creasers: C500, C500e and Rollo |
Fastbind smaller format creasers: C33, C400 or any Fastbind large format creasers: C500, C500e and Rollo |
|||
| Fastbind Thermal press (for making grooves to hard covers) |
Fastbind Presso, Fastbind Pressomatic |
||||
| Non-Fastbind equipment |
PUREX single arm recirculating fume extractor, Vacuum Sealer (to seal opened PUR glue bags), Sidose FL-32H Laminator |
Sidose FL-32H Laminator |
|||